Mini Stock Rules

1. Bodies - 1971-2005. Any compact or Sub compact front or rear wheel drive.
Must have full stock body, firewall and floor pan. No sports car, vans, Volkswagons, or Convertibles. Trucks are permitted (must be all stock for that
Vehicle). All parts on racecar must be stock except where noted. Any infraction may require weight penalty. Aftermarket hoods and bumpers are permissible.

A. Radiator protection bar must not be forward of the bumper. Bumpers do not have to be
in stock, bust must not be wider than the fenders. Rear spoiler o.k. 8" maximum.

B. Front and rear wrecker hooks are mandatory, but must not extend past bumper. Minimum
wheelbase is 90" and maximum is 101". Cockpit style interior and skirting are permitted. Frames-Unibody must be reinforced is mandatory.

C. Racing seat, harness, window net, fire ext. fuel cell, three 308 rods in front of driver, full fire suit, and approved helmet required at all times.

2. Suspension must be stock type. After-market type springs and shocks are permissible. Must be in stock location. Alternations of upper or lower control arms and spring buckets are not permitted. Cars with coil springs may have 2 wedge bolts in rear. Cars with leaf springs may have adjustable shackles-sliders on each leaf spring.

3. Wheels - After-market steel wheel permitted maximum 8" wide. Off set is permitted.

4. Tires - 60 series Street Radials only. No racing tire, recaps, etc.

5. Engine - 2300 cc max. Engine will remain in stock location. Max bore 60 over. Factory OEM rods and crank. No lightening or knifing. Stock stroke for engine. Any Hydraulic cam and lifters only... Factory OEM head must match block. Decking of head and intakes are permissible. No after-market intakes. Pistons
will be flat or dished. No domes - may be after-market. Stock carb or 500 cfm Holley Part #4412 (gas only). One 1 inch adapter spacer permitted. NO electric fuel pumps. Max compression is 170. May be checked at any time.

6. Transmission must be stock OEM type with all working gears in standard shift, automatic transmission must have working torque converter. Clutch-factory OEM clutch and fly wheel. Fly wheel must weigh 13 lbs. minimum. Scatter-
proof bell housing recommended.

7. Weight: 2200 Lbs. minimum weight with drive after race. Top 3 in heat & feature will weigh.

8. Brakes-rear disc is permissible. Must be OEM rotors and calipers. After-market pedals and master cylinders are optional.

9. Any items not listed above will be at the track management discretion.

10. Top 3 Cars will pull to their trailer after weigh-in and pull valve covers each night.

11. Competition Rule: Feature winners will start no higher than row three on next appearance at track. Two consecutive wins and you will start no higher than row 5 on next appearance at track. Three consecutive wins and you will start on last row of next feature. Any Racer that wins 4 features will start no better than row three in feature the remainder of the season.

12. It will be at the discretion of Checkered Flag Speedway to tech the top 5 finishers when it is deemed necessary.